Altanus’ Movements

ALTANUS 1001E2824

Automatic 11” ½ – 25 jewels – incabloc – Glucydur balance wheel – Anachron hairspring – stop seconds’ device.
Hours and minutes, seconds’ hand at the centre, date at three hours. Winding duration 38 hours, frequency 28.800 vibrations per h /4 Hz. Automatic two way winding.

  1. Position for winding.
  2. For rapid date correction
    Attention: date correction impossible between 20,00 hours and 02,00 hours.
  3. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.

ALTANUS 1002E2834

Automatic 13” – 25 jewels – incabloc – Glucydur balance wheel – Etachron raquet – stop seconds’ device.
Hours and minutes, seconds’ hand at the centre, date at three hours, day at twelve hours. Winding duration 38 hours, frequency 28.800 vibrations per h / 4 Hz. Automatic two way winding.

  1. Position for winding.
  2. For rapid date correction clockwise, day correction anti-clockwise.
    Attention: date correction impossible between 20,00 hours and 02,00 hours.
  3. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.

ALTANUS 1003E2824/2BV

Automatic 11” ½ with visible balance wheel – 25 jewels – incabloc – Glucydur balance wheel – Anachron hairspring – Stop seconds’ device.
Hours and minutes, seconds’ hand at the centre. Winding duration 38 hours, frequency 28.800 vibrations per h / 4 Hz. Automatic two way winding.

  1. Position for winding.
  2. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.

ALTANUS 1004S9035

Automatic 11” ½ – 28 jewels – Glucydur balance wheel – Anachron hairspring – Stop seconds’ device.
Hours and minutes, seconds’ hand at the centre, date at three hours. Power reserve’s pointer at six hours – 24hours’ pointer at twelve hours. Winding duration 42 hours, frequency 28.800 vibrations per h /4 Hz. Automatic two way winding.

  1. Position for winding with power reserve’s pointer.
  2. For rapid date correction.
    Attention: date correction impossible between 20,00 hours and 02,00 hours.
  3. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.
  1. Pusher to correct the second 24 hours’ time.

ALTANUS 1005EV7750M

Automatic 13” ¼ – 25 jewels- incabloc – Glucydur balance wheel – Anachron hairspring – Stop seconds’ device.
Hours and minutes, date at three hours,12hours’ counter at six hours’, 30 minutes’ counter at twelve hours, chronograph 60 seconds’ hand at the centre. Winding duration 42 hours without chronograph, frequency 28.800 vibrations per h /4 Hz. Automatic one way winding.

  1. Position for winding.
  2. For rapid date correction
    Attention: date correction impossible between 20,00 hours and 02,00 hours.
  3. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.
  1. Pusher to start and to stop chronograph
  2. Pusher to reset chronograph

ALTANUS 1005EV7750

Automatic 13” ¼ – 25 jewels- incabloc – Glucydur balance wheel – Anachron hairspring – Stop seconds’ device.
Hours and minutes, little seconds’ hand at nine hours, date at three hours,12hours’ counter at six hours,30 minutes’ counter at twelve hours, chronograph 60 seconds’ hand at the centre. Winding duration 42 hours without chronograph, frequency 28.800 vibrations per h /4 Hz. Automatic one way winding.

  1. Position for winding.
  2. For rapid date correction
    Attention: date correction impossible between 20,00 hours and 02,00 hours.
  3. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.
  1. Pusher to start and to stop chronograph
  2. Pusher to reset chronograph

ALTANUS 1005EV7750DD

Automatic 13” ¼ – 25 jewels- incabloc – Glucydur balance wheel – Anachron hairspring – Stop seconds’ device.
Hours and minutes, little seconds’ hand at nine hours, day and date at three hours, 12hours’ counter at six hours, 30 minutes’ counter at twelve hours, chronograph 60 seconds’ hand at the center. Winding duration 42 hours without chronograph, frequency 28.800 vibrations per h /4 Hz. Automatic one way winding.

  1. Position for winding.
  2. For rapid date correction clockwise, day correction anti-clockwise.
    Attention: date correction impossible between 20,00 hours and 02,00 hours.
  3. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute  and to set the hand backwards.
  1. Pusher to start and to stop chronograph
  2. Pusher to reset chronograph

ALTANUS 1005EV7750DM

Automatic 13” ¼ – 25 jewels- incabloc – Glucydur balance wheel – Anachron hairspring – Stop seconds’ device.
Hours and minutes, little seconds’ hand at nine hours, date at six hours, 12hours’ counter at six hours, 30 minutes’ counter at twelve hours, chronograph 60 seconds’ hand at the centre. Winding duration 42 hours without chronograph, frequency 28.800 vibrations per h /4 Hz. Automatic one way winding.

  1. Position for winding.
  2. For rapid date correction.
    Attention: date correction impossible between 20,00 hours and 02,00 hours.
  3. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.
  1. Pusher to start and to stop chronograph
  2. Pusher to reset chronograph

ALTANUS 1006EV7751

Automatic 13” ¼ – 25 jewels- incabloc – Glucydur balance wheel – Anachron hairspring – Stop seconds’ device.
Hours and minutes, little seconds’ hand and 24hours’ counter at nine hours, day and month’s windows at twelve hours, lunar phases’ window at six hours. Date hand outside the dial. 12hours’ counter at six hours, 30 minutes’ counter at twelve hours, chronograph 60 seconds’ hand at the centre. Winding duration 42 hours without chronograph, frequency 28.800 vibrations per h /4 Hz. Automatic one way winding.

  1. Position for winding
  2. For rapid date correction anti-clockwise.
    For rapid lunar phases correction clockwise.
  3. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.
  1. Pusher to start and to stop chronograph
  2. Pusher to reset chronograph
  3. Pusher for rapid date correction

ALTANUS 1007ES2801/1

Automatic 11” ½ – 25 jewels – incabloc- Glucydur balance wheel – Anachron hairspring – Stop second’s device.
Hours, minutes and seconds – Day and month’s windows at twelve hours, lunar phases’ window at six hours. Date hand outside the dial. Winding duration 38 hours, frequency 28.800 vibrations per h / 4 Hz. Automatic two way winding.

  1. Position for winding
  2. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.
  3. Posizione di messa all’ora precisa, si consiglia di superare il minuto desiderato, poi portare indietro la sfera nella posizione esatta.
  1. Pusher for rapid month correction
  2. Pusher for rapid date hand outside the dial correction
  3. Pusher for rapid day correction
  4. Pusher for rapid lunar phases correction

ALTANUS 1008EV7753

Automatic 13” ¼ – 49 jewels- incabloc- Glucydur balance wheel – Anachron hairspring – Stop seconds’ device.
Hours and minutes, little seconds’ hand at nine hours, 30 minutes’ counter at three hours, date at six hours, chronograph 60 seconds’ hand at the centre. Winding duration 38 hours, frequency 28.800 vibrations per h / 4 Hz. Automatic two way winding.

  1. Position for winding
  2. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.
  1. Pusher to start and to stop chronograph
  2. Pusher to reset chronograph
  3. Pusher for rapid date correction

ALTANUS 1009E2045

Automatic 13” ¼ – 49 jewels- incabloc- Glucydur balance wheel – Anachron hairspring – Stop seconds’ device.
Hours and minutes, little seconds’ hand at three hours, 45 minute’s counter at nine hours, chronograph 60 seconds’ hand at the centre. Winding duration 38 hours, frequency 28.800 vibrations per h / 4 Hz. Automatic two way winding.

  1. Position for winding
  2. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.
  1. Pusher to start and to stop chronograph
  2. Pusher to reset chronograph

ALTANUS 1010E6498R

Manual winding 16” ½ converted in regulator – 17 jewels – incabloc – Glucydur balance wheel – Anachron hairspring.
Hours’ counter at twelve hours – minutes’ hand at the centre – little Seconds’ counter at six hours. Winding duration 46 h – Frequency 18.000 vibrations h/ 2,5 Hz – Manual winding.

  1. Position for winding
  2. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.

ALTANUS 1010E6498PR

Manual winding 16” ½ power reserve – 17 jewels – incabloc – Glucydur balance wheel – Anachron hairspring.
Hours and minutes, little seconds’ hand at six hours. Power reserve’s pointer at eleven hours. Winding duration 46 h – Frequency 18.000 vibrations h/ 2,5 Hz – Manual winding.

  1. Position for winding with power reserve’s pointer.
  2. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.

ALTANUS 1011E6497

Manual winding 16” ½ – 17 jewels – incabloc – Glucydur balance wheel – Anachron hairspring.
Hours and minutes, little seconds’ hand at nine or at six hours. Winding duration 46 h – Frequency 18.800 vibrations h/ 2,5 Hz – Manual winding.

  1. Position for winding.
  2. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.

ALTANUS 1012E7001P

Manual winding 10” ½ – 21 jewels – incabloc- Glucydur balance wheel – Anachron hairspring.
Hours and minutes, little seconds’ hand six hours. Winding duration 42 h – Frequency 21.600 vibrations h/ 2,5 Hz. Manual winding.

  1. Position for winding.
  2. Position of hand-setting, for precise setting it is recommended to pass beyond the desired minute and to set the hand backwards.